What is what to do when a pull up goes through the washer?

Okay, here's some information about what to do when a pull-up goes through the washing machine, formatted in Markdown with the specified links:

Dealing with a Pull-Up in the Washing Machine

Discovering a disintegrated pull-up in your washing machine is a frustrating, but common, experience. Here's what to do:

• Stop the Machine: Immediately stop the washer to prevent further shredding and distribution of the absorbent material.

• Assess the Damage: Carefully inspect the drum and the clothes. Determine the extent of the mess. Is it a light dusting or a complete fiber explosion?

• Manual Removal:

  • Remove the clothing item-by-item, shaking each piece to dislodge as much of the gel and fiber as possible. Place the soiled items in a large trash bag.
  • Use your hands (wearing gloves is recommended!) to scoop out large clumps of gel or fiber.
  • For areas with a larger amount of gel, you can use a wet/dry vacuum to get rid of it. Make sure you are using a wet/dry vacuum as a normal vacuum can break.

• Rinse the Washer:

  • Run the washer on an empty rinse cycle. This will help flush out remaining debris. You may need to do this multiple times. Consider adding a cup of white vinegar to the rinse cycle to help dissolve any lingering gel residue.
  • Clean the rubber seal around the door thoroughly. This area often traps absorbent material.

• Clean the Dryer (If Necessary): If you accidentally transferred the affected clothes to the dryer, clean the lint trap very thoroughly. Check the dryer drum for any lingering gel or fiber. Wipe it down with a damp cloth.

• Prevent Future Occurrences: Designate a specific laundry hamper for heavily soiled items, or establish a pre-wash check routine to prevent future incidents.

• Dealing with Stubborn Residue: If you find small gel pieces stuck to clothing after washing, try gently rubbing the fabric against itself underwater. You can also soak the affected areas in a solution of water and baking soda for a few hours before re-washing.

• Consider a Washing Machine Cleaner: For a particularly bad mess, consider using a washing machine cleaner according to the manufacturer's instructions after you have manually removed the residue.

Dealing with the aftermath is always unpleasant, but with these steps, you can minimize the damage and get your washing machine back in working order. Washing Machine Cleaners Rinse the Washer Stop the Machine Assess the Damage Prevent Future Occurrences Manual Removal